Full Kit DIY GPS Drone RC Fiberglass Frame Multicopter FPV APM2.8 1400KV Motor 20A ESC flysky 2.4GFS i6 Transmitter F14891 B

Full Kit DIY GPS Drone RC Fiberglass Frame Multicopter FPV APM2.8 1400KV Motor 20A ESC flysky 2.4GFS i6 Transmitter F14891 B
  • Продавецcsline.info
  • Список ценUS $147.64piece
  • Продажная ценаUS $147.64piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,8 (638)

Oписание продукта


 

RC Carbon Fiber Frame Multicopter Full Kit DIY GPS Drone FPV  Radiolink AT9 Transmitter APM2.8 1400KV Motor 30A ESC

 

Specifications:

 frame in light weight, the conventional FPV configuration as a whole take-off weight can be controlled at about 500 grams
general configuration 5"-10" propeller (Not inclued)
Personality Across Design
,Material:Carbon Fiber Frame kit 

Frame reference:

Motor: MT2204 or MT2206 (Not included)

Propellers: (Not included)
2204 motor use FC 5"-6" blade
2206 motor use FC 5" 6" 8" blade
ESC: 15A-20A (Not included)
Voltage: 11.V-11.8V (Not included)
Weight about: 200g
 
Motor:
KV: 1400
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: Φ27.5 x 30mm
Shaft Diameter: Φ3.17mm
Weight: 47g
 
ESC:
1  Specification  
 
1.1 Output:  Continuous 25A, Burst 40A up to 10 Secs.  
1.2 Input Voltage:  2-4 cells lithium battery or 5-12 cells NiCd/NIMh battery.     
1.3 BEC:  3A  
1.4 Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.                                (BLM: BrushLess Motor)  
1.5 Size:  45mm (L) * 25mm (W) * 11mm (H).  
1.6 Weight: about 25g.  
 
2  Features  
 
2.1 Safety Arming Feature:  Regardless the throttle stick position, the motor will not spin after battery connected.  
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.  
2.3 Programmable Items:        Brake Setting: brake enabled / brake disabled.        Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).        Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.        Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.        Start Mode: normal / soft / very soft.        Timing: low / medium / high.        Reset:  reset  all  the programmable items to their default settings.  
2.4 Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.  
 
3   Advantages    
3.1 Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.  
3.2 Extreme low resistance PCB is helpful for getting a super current endurance capability.  
3.3 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.    
 
Radiolink AT9 Transmitter Features  
 
FULL TYPES AND FUNCTIONS
Suit for all airplanes including helicopter 8 swash plate models, fixed wing 2 airfoils 3 rears, 
gliders 4 airfoils 2 rears and aircraft.
FAST RESPONSE
It takes 3ms only for 9 channels to response parallel, which is less than the average time 20ms.
SUPER STABLE AND LONG DISTANCE OPERATING
DSSS spread spectrum mode supplies better performance in anti-interference .
QPSK modulation mode.
Actual measurement: 900 meters ground and 1.5kms air.
 
DATA TELEMETRY
Adopt two-transmission technology of Radiolink AT10 10CH radio control, support signal strength, receiver voltage monitored, and extending battery voltage, temperature, motor RPM, GPS etc.
 
 
VIBRATION ALARM
Vibration alarming is used to avoid any ignorance in a noisy condition, assure a safe flight.
 
CHINESE AND ENGLISH MENU
Bilingual menu, Chinese and English.
 
S-BUS SUPPORT
R9D support and compatible with FUTABA S-BUS. No matter for 3 axis control system or aircraft controlling S-BUS, AT9 is perfectly used. No need for too many cables and too much weight.
 
 
FIRST CONTROL SYSTEM CONTAINING MENU OF AIRCRAFT
Most players use plane or helicopter menu to set when they are playing multi-copter. AT9 brings aircraft menu into the system, which supplies a better and simple way for multi-copter.
 
HIGH SECTION PRECISION 4096 RUDDER SHAKE FREE
4096 section precision.
0.25us per section.
Servo anti-shake rudder.
 
NAVIGATION MENU
Navigation menu offering next step, simplified the operating and setting.
 
USB UPDATING
Updated by a USB cable on the company website, which keeps all time the most advanced system and program.
 
 
MINI RECEIVER
Size: 41*23*14mm.
The smaller size the receiver is, the more convenient to fix. R9D is even smaller than a normal 9channel receiver.
 
PROGRAMMABLE MIX CONTROL
Basic menu, advanced menu, graph view for varieties of throttle and servo curve, 5-9 channels are customizable.
  
HUMANIZED SWITCH POSITIONING
 
 
Two knob switches, two slicer swith, three three-way switches, four two-way switches, a reset trainer switch. Support multiple aerial control mode and PTZ control.
 
Package listing:  
1*  Carbon Fiber Alien Across Mini Quadcopter DIY Frame Kit  
4*  A2212 1400KV Brushless Outrunner Motor  
4* FMT JMT 30A Brushless ESC Speed Controller  
2* 7045 propeller (pair)  
1* KK Multi-Copter Power Battery to 8 ESC Connection Board  
  1  *APM2.8 APM 2.8 Multicopter Flight Controller 2.5 2.6 Upgraded Built-in Compass
  1  * 6M GPS with Compass L5883 25cm Cable
 
  5  * 10cm Servo Extension Lead Wire Cable MALE TO MALE  
1GPS Folding Antenna Mount Holder  
1      Radiolink AT9 Transmitter & Receiver  
1* 11.1V 20C 2200Mah Lipo Battery  
1* IMAX RC B3 Pro Compact Balance Charger  

1* Tool kit